Bodet HARMONYS Notice D'utilisation Et D'installation page 24

- Reboot: This setting is used to detect a clock reboot.
- Scheduled melody: This parameter triggers an alarm when a programmed melody is
played.
- Manual melody: This parameter is used to trigger an alarm when melody is initiated
manually.
- Streaming: the device sends back the information that an audio stream is in process
of being played.
- Alert melody: This parameter triggers an alarm when an alert melody is played.
- Missing melody: this parameter sets off an alarm when a played melody is missing.
- Web access: This setting is used to trigger an alert if a user connects to the web ser-
ver of the clock.
- Authentication failure: This setting is used to trigger an alert if a user sends an incor-
rect ID to the web server of the clock.
- Repeater failure: This parameter triggers an alarm when a fault occurs on the repeater.
- Periodic Status: This setting is used to verify that the device is still working correctly.
This verification is carried out at a set frequency.
24