Use Of The Product; Home Page - Bodet HARMONYS Notice D'utilisation Et D'installation

III - Use of the product
There are two ways to access the web interface:
1/ Open your web browser and enter the IP address of the product in the address bar.
2/ Using the Sigma software in the Configuration > IP devices > Harmonys tab click the Web
Browser button to open the web server (refer to the software manual, 607726).
The SIGMA software lets you:
- detect all the products present on the network,
- individually set the parameter of each product or copy the parameter of one product toward a
group of products,
- update the product software,
this manual presents the Web server of a ceiling sounder, the information is identical for
a wall sounder.

3.1 Home page

The home page presented by the product embedded web server provides a general information
on the product.
The information is displayed as follows:
- Product: product type.
- Name: user-defined product name + MAC adress (corresponding to the MAC address noted
on the tag of the product identification during installation). By default: «Bodet-MAC address»
(alterable in the menu Network Configuration). The default value allows to find the product on
the network in the putting into service.
20