I - Initial Verification; Unpacking The Harmonys Outdoor Sounder; Cleaning; Pre-Requisit - Bodet Harmonys 607725 I Notice D'utilisation

I - Initial Verification

Thank you for choosing a BODET bell system. This product has been carefully designed for
your satisfaction based on ISO9001 quality requirements.
We recommend that you read this manual thoroughly before attempting to manipulate the
product.
Keep this booklet during all the life of your product, so that you can refer to it each time it is
necessary.
Bodet cannot be held responsible for damages caused to the product due to use that
does not conform to the instructions described in this manual.
Anyunauthorisedmodificationoftheproductwillinvalidatethewarranty.

1.1 Unpacking the Harmonys outdoor sounder

Unpack with caution and check the contents of the packaging.
907730 must contain:
■ Harmonys outdoor sounder (a second sounder with reference 907731),
■ This booklet,

1.2 Cleaning

Use an antistatic product identical to that supplied. Never use alcohol, acetone or other solvents
which may damage product casing.

1.3 Pre-requisit

For the commissioning of the Harmonys sounder, you must install the SIGMA software (supplied on
CD with your master clock) on your PC. To download the latest version of the software, contact our
export department who will send you the download links by email: export@bodet-timesport.com.
to check compatibility of your equipment and the software version, please have the
version of your master clock.
Safety and Emergency Procedures alarms (SEP) are available for download on the
Bodet website at the following address :
http://www.bodet-time.com/en/bell-systems/download-melodies.html
The identification of one or more Harmonys chimes, requires the presence of one or two
persons:
- 1 person: we recommend wiring Harmonys one by one to your bay. You can then locate the
sounder easily as long as the cable is identified.
- 2 persons: a person making the identification from software (see manual 607726). The
second person standing in the area where the Harmonys sounder is located to hear beeping in
order to identify it (eg: hallway, foyer).
15