Factory Configuration - Bodet HARMONYS Notice D'utilisation Et D'installation

2.4 Factory configuration

1/ When the power is on, press the test button (until you hear a continuous «beep» ).
The default configuration is as follows :
- Name: BODET-MAC address
- IP configuration by DHCP
- Multicast synchronisation (broadcast)
- Synchronisation address: 239.192.55.1
- Volume: level 5
- Zone number: 1
Test button :
Pressing = the product emits a melody.
Pressing at the power on = return to factory
configuration
Power supply indicator :
LED ON = device powered on.
LED OFF = no power.
Power supply indicator :
LED ON (green) = device powered on.
LED OFF = no power.
Network indicator :
LED flashing green fast = connection to the
network in progress.
LED flashing green slowly = device connected to
the network
LED flashing red slowly = loss of network
connection or failure to connect to the network.
Test button :
Pressing = the product emits a melody.
Pressing at the power on = return to factory
configuration
Network indicator :
LED flashing green flash = connection to
the network in progress.
LED flashing green slowly = device
connected to the network
LED flashing red slowly = loss of network
connection or failure to connect to the
network.
19