Emptying The Dirt Container; Cleaning The Appliance; Cleaning The Rotary Brush - SilverCrest SHSS 12 C2 Mode D'emploi

Emptying the dirt container

1) To open the dirt container
element from the hand element recess
2) Press both buttons
pull the dirt container
You can now lift this off upwards/forwards.
3) Remove the dust filter
your fingers. Rinse the dust filter
water and let it air dry. Do not use hot air to
dry the dust filter
4) Then remove the coarse filter
pulling it out.
Fig. 3
5) Empty the dirt container
6) Now you can re-insert first the coarse filter
and then the dust filter
7) Replace the dirt container
the catch into the notch in the hand element
and then pushing the front part of the dirt con-
tainer firmly downwards so that the dirt
container clicks firmly into place.

Cleaning the appliance

Wipe the appliance with a damp cloth. For stubborn
dirt, wipe, adding mild detergent to the cloth.
Ensure that the appliance is completely dry before
the next use.
■ 8 │ GB │ IE │ NI
, remove the hand
and, at the same time,
upwards.
by pulling it out with
in clear
.
also by simply
.
.
by first inserting

Cleaning the rotary brush

The rotary brush
. residues, such as hair, after a while. To remove this
dirt, you can remove the rotary brush
1) Turn the floor nozzle upside down.
2) Push the catch on the cover plate to the rear
so that you can remove the cover plate.
3) Lift out the rotary brush
4) To replace the rotary brush
broad end onto the drive shaft so that the
rotary brush
5) Then push the other end into the mount so that the
rotary brush
6) Replace the cover plate and fasten it firmly into
place.
Fig. 4
can become covered in
(Fig. 4).
.
, first push the
hooks into place.
sits straight in the floor nozzle.
SHSS 12 C2