Unpacking/Delivery; Machine Description; Operation Capabilities; Conventions - Nilfisk Advance RS 500 Instructions D'utilisation

INSTRUCTIONS FOR USE

UNPACKING/DELIVERY

The machine is delivered already assembled and
ready-to-use, unpacking/installation procedures are not
necessary.
Please check that the following items have been supplied with
the machine:
– Technical documents:
– Sweeper Instructions for Use Manual
– Diesel Engine Manual
– Sweeper Spare Parts List

MACHINE DESCRIPTION

OPERATION CAPABILITIES

This sweeper has been designed and built to be used by a
qualified operator to clean (by sweeping and suctioning)
roads, smooth and solid floors, in civil and industrial
environments, and to collect dust and light debris under safe
operation conditions.

CONVENTIONS

Forward, backward, front, rear, left or right are intended with
reference to the operator's position, that is to say on the
driver's seat (17, Fig. E).

DESCRIPTION

Description of the control area
(See Fig. D)
1. Meter and control panel
2. Indicators and warning lights
3. Optional indicator light
4. Optional indicator light
5. Engine coolant temperature
6. High beam indicator light
7. Running light indicator light
8. Charged battery indicator light (a buzzer activates
together with the indicator light)
9. Parking brake warning light
10. Glow plug pre-heating warning light
11. Hour counter/revolution counter display:
– It displays the hours, when the ignition key (17, Fig.
D) is turned on the first position, before running the
engine
– It displays the engine speed, when the engine is
running and the charged battery warning light is off
12. Charged battery indicator light (a buzzer activates
together with the indicator light)
13. Optional indicator light
14. Engine coolant high temperature warning light (a buzzer
activates together with the warning light)
15. Charged battery indicator light (a buzzer activates
together with the indicator light)
6
16. Turn signal indicator light
17. Ignition switch
18. Climate control system switch (*)
19. Dust control system switch (water pump)
20. Windscreen wiper/washer switch
21. Cab air flow switch (two speed)
22. Hazard warning light switch
23. Dust control system water tank low warning light (red)
24. Fuse box B (see the Electrical Fuses paragraph)
25. Fuse box A (see the Electrical Fuses paragraph)
26. Lifted hopper warning light (red)
27. Warning buzzer (it activates together with the warning
lights 8, 12, 14, 15)
28. Hopper door opening/closing switch
(See Fig. E)
1. Combination switch, having the following functions:
– Headlights off, with mark (1b) at the symbol O
– Running lights on, with mark (1b) at the
symbol
– Low beam on, with mark (1b) at the symbol
– High beam on, with mark (1b) at the symbol
and lowered lever (1a)
– High beam temporary on, lifting the lever (1a)
– Right turn signal on, bringing the lever (1a) forward
– Left turn signal on, bringing the lever (1a) backward
– Horn activation, pushing the lever (1a) in the
direction shown by the arrow (1c)
2. Steering wheel
3. Windscreen wiper motor
4. Drive pedal
– to be pressed on the front side to move forward
– to be pressed on the rear side to move backward
5. Brake pedal
6. Steering wheel adjusting lever
7. Parking brake lever
8. Suction inlet dust control system nozzles valve
9. Broom dust control system nozzle valve
10. Hopper lifting/lowering lever
11. Driver's seat safety belt (*)
12. Suction inlet and broom lifting/lowering lever
13. Skirt opening/closing switch
14. Suction activation lever
15. Cab heater control knob
16. Diesel engine throttle lever
17. Driver's seat
18. Battery
19. Cab left panel
20. Cab right panel
21. Serial number/technical data plate
22. Driver's seat forward/backward adjustment lever
23. Hopper lifting/lowering lever safety flange
24. Suction inlet and broom lifting/lowering lever safety
flange
25. High-pressure water gun
33015122(1)2006-02