Spare Parts And Maintenance; Changes And Improvements; Operation Capabilities; Conventions - Nilfisk SR 1101 B Instructions D'utilisation

SPARE PARTS AND MAINTENANCE

All necessary operating, maintenance and repair procedures must be performed by qualifi ed personnel or by Nilfi sk Service
Centers. Only original spare parts and accessories must be used.
Call Nilfi sk for service or to order spare parts and accessories, specifying the machine model and serial number.

CHANGES AND IMPROVEMENTS

Nilfi sk constantly improves its products and reserves the right to make changes and improvements at its discretion without being
obliged to apply such benefi ts to the machines that were previously sold.
Any change and/or addition of accessory must be approved and performed by Nilfi sk.

OPERATION CAPABILITIES

This sweeper has been designed and built to be used by a qualifi ed operator to sweep/clean smooth and solid fl oors, in civil and
industrial environments, and to collect dust and light debris under safe operation conditions.

CONVENTIONS

Forward, backward, front, rear, left or right are intended with reference to the operator's position, while on the driver's seat (25).

UNPACKING/DELIVERY

To unpack the machine carefully follow the instructions on the packing.
Upon delivery check that the packing and the machine were not damaged during transportation. In case of visible damages, keep
the packing and have it checked by the carrier that delivered it. Call the carrier immediately to fi ll in a damage claim.
Check that the machine is equipped as follows:
– Technical documents:
• Sweeper User Manual
• Electronic Battery Charger Manual (if equipped)
• Sweeper Spare Parts List
– No. 1 70 A fuse
– No. 1 external battery charger connector (if the machine is not equipped with on board battery charger)
SR 1101 B 1464015000(1)2009-04 A
USER MANUAL ENGLISH
3