(Fig.
20 )
Start procedure for model
LC 141C: loosen start
inhibitor, push motor
brake handle down.
(Fig. 21 )
Release motor brake
handle to stop.
(Fig. 22 )
Slow
(Fig. 23 )
Fast
(Fig. 24 )
Note: Other symbols/decals on the product refer to
certification requirements for some markets.
Symbols on the battery and/or on the
battery charger
(Fig.
25 )
12
Start procedure
for model
LC 141VLi/
LC 141Li: push
ON/OFF but-
ton, loosen
start inhibitor,
push motor
brake handle
down.
Recycle this
product at a re-
cycling station
for electrical
and electronic
equipment.
(Applies to Eu-
rope only)
Fail-safe transformer.
(Fig. 26 )
Use and keep the battery
charger indoors only.
(Fig. 27 )
Double insulation.
(Fig. 28 )
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
•
the product is incorrectly repaired.
•
the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
•
the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
•
the product is not repaired at an approved service
center or by an approved authority.
71 - 005 - 18.05.2018