IMG STAGELINE LED-500DX Mode D'emploi page 14

8 Additional Functions
GB
8.1 Indication of operating hours
To indicate the status of the operating hours counter:
1) Press the button MENU (9) so many times until
(Fixture hours) appears on the display (6).
2) Press the button ENTER (11). The operating hours
will be indicated.
3) After 10 seconds, the unit will return to the previous
operating mode.
8.2 Indication of firmware version
To indicate the version number of the firmware (oper-
ating system of the stroboscope):
1) Press the button MENU (9) so many times until
(version) appears on the display (6).
2) Press the button ENTER (11). The version number
will be indicated, e. g.
3) After 10 seconds, the unit will return to the previous
operating mode.
All rights reserved by MONACOR
be reproduced in any form or by any means for any commercial use.
14
= version 1.1.
® INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may
9 Cleaning of the Unit
The plastic pane should be cleaned at regular inter-
vals, depending on impurities caused by dust, smoke
or other particles. Only this will ensure that the light is
radiated at maximum brightness. For cleaning, dis-
connect the mains plug from the socket. Only use a
soft, clean cloth and a mild detergent. Then wipe the
plastic pane dry.
For cleaning the other parts of the housing, only use
a soft, clean cloth. Never use any fluid; it may leak into
the unit and cause damage.
10 Specifications
Power supply: . . . . . . . . 230 V~/50 Hz
Power consumption: . . . 25 VA
Light source: . . . . . . . . . 192 super bright white LEDs
Ambient temperature: . . 0 – 40 °C
Dimensions. . . . . . . . . . 320 × 190 × 120 mm
Weight: . . . . . . . . . . . . . 2.2 kg
Subject to technical modification.