Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Radio mode
Note:
For the tuner region "EUROPE": In the FM
waveband, the next station of the broadcast-
ing network is automatically tuned into if the
RDS function is switched on.
Starting station seek tuning
u
Press the button
onds to start station seek tuning.
The radio tunes into the next receivable sta-
tion.
Notes:
•
For the tuner region "EUROPE": In the FM
waveband, only traffi c information stations
are tuned into if the priority for traffi c infor-
mation (
) is switched on.
•
The sensitivity of seek tuning can be ad-
justed (see the chapter "User settings",
section "Performing settings in the user
menu", menu item "SENS").
Storing stations/Calling stored
stations
u
Select the desired memory bank.
u
If necessary, set the desired station.
u
Press the station button 1 - 5
2 seconds to store the current station under
the button.
- or -
u
Briefl y press the station button 1 - 5
up the stored station.
Scanning stations
The scan function is used to scan every receivable
station of the current waveband.
u
Press the MENU/OK button
2 seconds to start the scan, or long to con-
tinue playing the currently set station.
During the scan, the display alternately dis-
plays "SCAN" and the current frequency as
well as memory bank or station name.
22
7
/
for approx. 2 sec-
:
for approx.
:
to call
2
for approx.
Note:
For radio mode, you can adjust the scan time
for each station (see the ch. "User settings",
section "Performing settings in the user
menu", "SCAN TIME" menu item).
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search for
and store the 5 FM stations off ering the strongest
reception in the region in one memory bank, Any
previously stored stations in this memory bank are
deleted in the process.
In the tuner regions "EUROPE" and "THAI", you
can store 5 FM stations in the FMT memory bank
with Travelstore. In the tuner regions "USA" and
"S AMERICA", you can also store 5 AM stations in
the AMT memory bank.
u
Select a memory bank of the desired wave-
band, e.g. FM1 or AM.
u
Press the button
onds.
The tuner starts the automatic station seek
tuning; the display shows "FM TSTORE" or
"AM TSTORE". After the storing is completed,
the radio plays the station at memory location
1 of the FMT or AMT level.
Note:
For the tuner region "EUROPE": If the priority
for traffi c information is switched on (
only traffi c information stations are stored.
Confi guring the display
u
Press the DISP/ESC button
tween these two displays:
Display
Meaning
ABCDEF
Station name
or
FM1 102.90
memory bank/frequency
FM1 11:32
Memory bank/time
7
/
for approx. 2 sec-
<
to change be-
or
),
Publicité
Chapitres
Table des Matières
