Ssm; Sbm; Extern Off - Wilo Stratos GIGA Série Notice De Montage Et De Mise En Service

No. Designation
5.1.0.0 Multi pump
5.1.1.0 Operating mode
5.1.2.0 Setting, MA/SL
5.1.3.0 Pump cycling
5.1.3.1 Manual pump
cycling
5.1.3.2 Internal/external
5.1.3.3 Internal: Time
interval
5.1.4.0 Pump enabled/
disabled
5.1.5.0

SSM

5.1.6.0

SBM

5.1.7.0 External off
5.2.0.0 BMS
5.2.1.0 LON/CAN/
IF-Module
Wink/service
5.2.2.0 Local/remote
operation
Installation and operating instructions Wilo-Stratos GIGA, Stratos GIGA-D, Stratos GIGA B
Type Symbol Values/explanations
Double pump
Main/standby operation
±
Parallel operation
Manual converting from master
±
to slave mode
Carries out pump cycling inde-
±
pendent of the countdown
Internal pump cycling
±
External pump cycling
Can be set between 8 h and 36 h
±
in 4 h steps
Pump enabled
±
Pump disabled
Individual fault signal
±
Collective fault signal
Individual readiness signal
±
Individual run signal
Collective readiness signal
Collective run signal
Individual external off
±
Collective external off
Settings for Building Manage-
ment System (BMS) – building
automation
The wink function permits the
±
identification of a device in the
BMS network. A "wink" is exe-
cuted by confirmation.
BMS local operation
±
BMS remote operation
English
Display conditions
Only displayed when DP is
active (incl. sub-menus)
Only displayed for double
pump master
Only displayed for double
pump master
Only displayed for double
pump master
Only displayed for double
pump master
Only displayed for double
pump master
Only displayed for double
pump master
Only displayed for double
pump master, see "AUX" ter-
minal
Displayed when internal
pump cycling is activated
Only displayed for double
pump master
Only displayed for double
pump master
Is only displayed for double
pump master and SBM func-
tion at readiness/operation
Only displayed for double
pump master
Only displayed for double
pump master
Only displayed for double
pump master
Only displayed for double
pump master
Only displayed for double
pump master
Incl. all sub-menus, only dis-
played when BMS is active
Only displayed when LON,
CAN or IF-Module is active
Temporary state, automatic
reset to remote operation
after 5 min
103