Density Determination Using The Suspended Weighing Device - KERN EMB 200-3V Mode D'emploi

When connecting an optional printer, pressing of
Printout example KERN YKB-01N:
D-REF:
D-RSL:
W-AIR:
W-LDQ:
Press ; balance will return to weighing mode. For further measurements start at
step 2.

8.3.2 Density determination using the suspended weighing device

How to prepare the weighing balance
 Turn off the scale and turn it around.
 Open closing cover at the balance bottom.
 Mount the hooks for underfloor weighing.
 Place weighing balance over an opening.
 Attach the suspension device.
 Pour the test liquid into a glass beaker.
 Control the temperature of the liquid, instruments and the displacement body
until the temperature is constant. Observe the warm-up time of the balance.
30
8.0409 g/cm^3
0.9984 g/cm^3
020.000 g
017.432 g
will print the result.
Sinker density
Result (Density of the test liquid)
Weight of sinker in air
Weight of the sinker in liquid
EMB-V-BA-e-1422