Interface Parameters - KERN EMB 200-3V Mode D'emploi

13.4 Interface parameters

Data transfer
mode
 Keep
 Acknowledge using
 Select desired setting by
PR�
rE CR
AU PC Continuous data output
 Acknowledge selection by
Baud rate
The baud rate defines the transfer speed vie the interface,
1 Baud = 1 Bit/second.
 Keep pressed
PR�
 Press
BAUD�
 Acknowledge using
 Use
 Acknowledge selection by
EMB-V-BA-e-1422
pressed in the weighing mode until [Pr] is displayed.
Data output via remote control commands
Data output using the PRINT key
weighing mode.
repeatedly until "bAUd" is displayed.
to select the desired settings
9600  4800  2400  1200  19200
weighing mode.
, the current setting is displayed.
.
. The balance returns to
in the weighing mode until [Pr] is displayed.
, the current setting is displayed.
. The balance returns to
43