Measurement Graphics Menu - Seko K500 TB Manuel D'installation

Performing this operation will delete all of the archived measurements.
4.3.11

MEASUREMENT GRAPHICS MENU

Archivio vuoto
This programming step allows the user to view the data in graphic format, as long as the archive is
not empty. Two options are available:
First record>>>
Date/Time>>>
Use the UP and DOWN arrows to scroll through the archive. The scrolling will stop once the first
or last record has been reached.
Base Times
The base times serve to establish the time interval for the graphic view. By default this value is set
to 1 hour, but the user may select from 1, 6 or 24 hours.
Once the graphic has been viewed, press the ENTER key to display a table indicating the
Minimum, Maximum and Average measurement values in the time interval associated with that
screen. Press the ENTER key again to display the progressive measurement details with reference
to the minimum and maximum values. Press the ENTER key once again to return to the initial
view.
The ZOOM function allows for slight variations in Turbidity / suspended solids to be recognized.
0000137221
5.0 MEASUR. GRAPHICS
First record
ENTER
Date/time
Base times
5.0 MEASUR. GRAPHICS
First record
Date/time
Base times
View
Date
Time
The data will be displayed starting with the first saved record and listed in
chronological order
The data will be displayed starting from a date and time set by the user
>>>>
ENTER
>>>>
1h
DOWN
>>>>
>>>>
1h
ENTER
5.20 DATE/TIME
>>>>
ENTER
26/04/05
14:45
NOTE
Rev. 3.1
20.00
14:38 26/04/05 15:38
ENTER
Maximum 10.8
Minimum 10.7
Average 10.7
45