Installation Of The Control Unit In The Electric Panel - Seko K500 TB Manuel D'installation

3.1.2

INSTALLATION OF THE CONTROL UNIT IN THE ELECTRIC PANEL

The wall must be completely smooth in order to allow for the perfect adhesion of the electric panel
where the control unit will be placed.
The usable depth of the panel must be at least 130 mm.
The thickness of the panel should not exceed 5 mm.
The drilling TEMPLATE must comply with the following diagram:
Dimensions (L x H x D)
Installation depth
Material
Installation typology
Weight
Front Panel
The control unit is secured to the panel using the two brackets (1) supplied, inserted in position (2)
and locked using the relative screws (3).
3
0000137221
Figure 5 – Dimensions and drilling template for the panel
Mechanical Dimensions
1
Figure 6 – Bracket securing the control unit to the panel
96x96x115.5mm
black ABS
UV resistant polycarbonate
Rev. 3.1
130 mm
Panel
0.7 Kg
2
19