Division Of The Graphic Display By Zones In Run Mode - Seko K500 TB Manuel D'installation

2.4.2

DIVISION OF THE GRAPHIC DISPLAY BY ZONES IN RUN MODE

The following table provides a brief description of the various symbols that can appear in each zone
of the graphic display (indicated in figure 3) while the measurement control unit is in function.
GRAPHIC
ZONE
1
2
1-2
0000137221
Figure 4 – Graphic display – Zone division
SYMBOL
Rev. 3.1
DESCRIPTION
Set1 - Relay Open
Set1 - Relay Closed
Set1 – Programmed, Timed,
Threshold Enabled, Relay Open
Set1 – Programmed, Timed,
Threshold Disabled, Relay Open
Set1 – Programmed, Timed,
Threshold Enabled, Relay Closed
Set2 - Relay Open
Set2 - Relay Closed
Set2 – Programmed, Timed,
Threshold Enabled, Relay Open
Set2 – Programmed, Timed,
Threshold Disabled, Relay Open
Set2 – Programmed, Timed,
Threshold Enabled, Relay Closed
Set Disabled
Indicates digital input ON
15