Environmental Concerns - Zanussi ZFU27400WA Notice D'utilisation

Door reversibility
Important! To carry out the following
operations, we suggest that this be made with
another person that will keep a firm hold on
the doors of the appliance during the
operations.
To change the opening direction of the door,
do these steps:
• Remove the plug from the power socket.
• Tilt back the appliance carefully so that the
compressor does not touch the floor.
1. Remove the plinth.
2. Unscrew and remove the lower hinges.
3. Remove the door.
4. Unscrew the upper pin and screw it on the
opposite side.
5. Refit the door.
6. Make sure the edge of the door is parallel
with the edge of the top.
2
1
7. Unscrew the pin (A) and screw it on the op-
posite side.

Environmental concerns

Recycle the materials with the symbol
the packaging in applicable containers to
recycle it.
Help protect the environment and human
health and to recycle waste of electrical and
24
8. Remove the cap (B) and position it on the
opposite side.
9. Screw the lower hinges.
10. Refit the plinth.
11. Stand the appliance upright.
12. Fit the handle on the opposite side and
put the plastic caps (contained in the instruc-
tions bag) in the free holes.
Do a final check to make sure that:
• All screws are tightened.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Win-
ter), the gasket may not fit perfectly to the cab-
inet. In that case, wait for the natural fitting of
the gasket.
In case you do not want to carry out the above
mentioned operations, contact the nearest Af-
ter Sales Service Force. The After Sales Serv-
ice specialist will carry out the reversibility of
the doors at your cost.
electronic appliances. Do not dispose
. Put
appliances marked with the symbol
household waste. Return the product to your
local recycling facility or contact your
municipal office.
A
B
www.zanussi.com
with the