This appliance can be installed in a dry, well
ventilated indoor (garage or cellar), but for opti-
mum performance install this appliance at a lo-
cation where the ambient temperature corre-
sponds to the climate class indicated on the
rating plate of the appliance:
Climate
Ambient temperature
class
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
Electrical connection
Before plugging in, ensure that the voltage and
frequency shown on the rating plate corre-
spond to your domestic power supply.
The appliance must be earthed. The power
supply cable plug is provided with a contact for
Environmental concerns
The symbol
on the product or on its
packaging indicates that this product may not
be treated as household waste. Instead it
should be taken to the appropriate collection
point for the recycling of electrical and
electronic equipment. By ensuring this product
is disposed of correctly, you will help prevent
20
All manuals and user guides at all-guides.com
this purpose. If the domestic power supply
socket is not earthed, connect the appliance to
a separate earth in compliance with current
regulations, consulting a qualified electrician.
The manufacturer declines all responsibility if
the above safety precautions are not observed.
This appliance complies with the E.E.C. Direc-
tives.
Ventilation requirements
1. Put the freezer in horizontal position on a
2. Make sure that the clearance between the
3. Make sure that the clearance between the
The airflow behind the appliance must be suffi-
cient.
potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. For more detailed
information about recycling of this product,
please contact your local council, your
household waste disposal service or the shop
where you purchased the product.
firm surface. The cabinet must be on all
four feet.
appliance and rear wall is 5 cm.
appliance and the sides is 5 cm.
www.zanussi.com