Publicité
Les langues disponibles
Les langues disponibles
DEAR CUSTOMER
The subject brochure is intended to familiarise you with the
operation of your battery charger. It is in your own interest to read
the brochure carefully and follow the instructions given exactly -
so as to prevent malfunctions and operating errors. This will help
to ensure that your battery charger continues to give you constant
service for years to come. It is imperative that you read the
section „Safety Regulations" prior to using your battery charger.
OPERATING ELEMENTS
Mains cable/plug
Positive charging line
Negative charging line
Multifunctional panel with integrated display and membrane
key pad
With "end-of-charging" option: 5-pole connection socket
With "External stop" option: 6-pole connection socket
For "Temperature-controlled charging": 6-pole connection
socket
For "Aquamatic" option: 5-pole connection socket
For "Electrolyte circulation"option: 6-pole connection socket
(pressure transducer) and 5-pole connection socket
(power supply)
For "Vehicle immobilisation" option: Control cables
For "Remote display" option: standardised LocalNet connection
socket
For "Relay board" option: standardised LocalNet connection
socket
Fig.1
Battery charger Selectiva Plus E
Text and illustrations correct at time of going to print. Right of alteration reserved.
INSTALLING CHARGING PLUG
Caution! Adapt the charging lines to suit the respective
application (e.g. install charging plug, etc.) Observe any
national regulations and always ensure proper electrical
connection of charging plug with charging lines.
- Connect charging line
- Connect charging line
CONNECT UP THE BATTERY
Note! As the charging lines are not alive the battery charger need
not be disconnected from mains when connecting the battery.
However ensure a proper electrical connection of the charging
plug with the charging coupler.
- Connect charging plug with correct poles of charging coupler
DISCONNECT THE BATTERY
To disconnect battery from battery charger, proceed as follows:
- Press [Start/Stop] key to interrupt charging process
- Disconnect charging plug from charging coupler socket
8
ENGLISH
with positive lead of charging plug
with negative lead of charging plug
Publicité
