Charging; Finishing Charging - akkuteam SL50 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Charging

7. Charging begins automatically after approx. 2 seconds.
8. A set of five LEDs show the battery's charge level.
0 – 20 %
9. After the battery is fully charged, the charger switches to

Finishing charging

10. Press the Stop/Start button to complete charging.
11. Disconnect charging cable (black) from negative pole (-) on battery.
12. Disconnect charging cable (red) from positive pole (+) on battery.
40 %
"conservation charging" mode and delivers 13.4 V (13.8 at Lithium)
with a maximum of 50 A.
Conservation charging: Once the battery is fully charged, the charger
automatically switches to conservation charging to prevent the
battery from self-discharging. The battery can remain connected to
the charger for any length of time.
CAUTION! Risk of sparks if the charging terminals are
disconnected too soon. Press Start/Stop button to finish
charging.
52
60 %
80 %
EN
95 – 100 %

Publicité

Table des Matières
loading

Table des Matières