Protecting Yourself And Others; Safety Measures During Normal Mode - akkuteam SL50 Manuel D'utilisation

Protecting
yourself and
others
Safety
measures in
normal mode
While the charger is in operation, keep all persons, especially
children, out of the working area. If, however, there are people in
the vicinity,
– warn them about all the dangers (hazardous acids and gases,
danger from mains and charging current, etc),
– provide suitable protective equipment.
Before leaving the work area, ensure that no-one or nothing can
come to any harm in your absence.
– Chargers with PE conductors must only be operated on a mains
supply with a PE conductor and a socket with an earth contact.
If the charger is operated on a mains without a PE conductor
or in a socket without an earth contact, this will be deemed to
be gross negligence. The manufacturer shall not be liable for
any damage resulting from such improper use.
– Only operate the charger in accordance with the degree of
protection shown on the rating plate.
– Under no circumstances operate the charger if there is any
evidence of damage.
– Ensure that the cooling air can enter and exit unhindered
through the air ducts on the charger.
– Have the mains and charger supply checked regularly by a
qualified electrician to ensure the PE conductors are function-
ing properly.
– Any safety devices and components that are not functioning
properly or are in an imperfect condition must be repaired by
an qualified technician before switching on the charger.
– Never bypass or disable protection devices.
– After installation, a freely accessible mains plug will be
required.
40
EN