Guarantee And Liability; Safety Inspection - akkuteam SL50 Manuel D'utilisation

Guarantee
and liability
Safety
inspection
Do not carry out any modifications, alterations, etc. without the
manufacturer's consent.
Dispose of in accordance with the applicable national and local
regulations.
The warranty period for the charger is 2 years from the date of
invoice. However, the manufacturer will not accept any liability if
the damage was caused by one or more of the following:
– Use of the charger "not in accordance with the intended
purpose".
– Improper installation and operation.
– Operating the charger with faulty protection devices.
– Non-compliance with the operating instructions.
– Unauthorised modifications to the charger.
– Catastrophes caused by the activities of third parties and force
majeure.
The operator is obliged to arrange a safety inspection of the
device at least once every 12 months.
The manufacturer recommends that the power source is calibrat-
ed during the same 12 month period.
A safety inspection must be carried out by a qualified electrician
– after any changes are made.
– after any additional parts are installed and after any conver-
sions.
– after repair, care and maintenance.
– at least every twelve months.
For safety inspections, follow the appropriate national and
international standards and directives.
Further information on safety inspections and calibration is
available from your service centre, who will be happy to provide
you with the required documentation.
42
EN