Blaupunkt ADAYO 590 Série Mode D'emploi page 27

Radio mode
Radio mode
Start radio mode
In the main menu, press the [ Radio ] button.
The radio playback menu is displayed.
Select memory bank
Different memory banks and wavebands are available.
Up to 18 FM and 12 AM stations can be stored in each
memory bank.
Press the [ FM/AM ] button to switch to FM or AM
band.
Tuning into a station
Tuning into stations manually
Briefly press the [
tion seek tuning
The radio tunes into the next receivable station.
Enter broadcast frequency directly
If the frequency of the desired stations is known, it can
be entered directly via the touchscreen.
Press the [ ] button to display additional operat-
ing options.
Press the [ ] button.
A numeric keypad is displayed for the frequency
input.
Enter the frequency of the desired station with the
numeric keypad.
Press the [ OK ] button.
] or [ ] button to start sta-
The radio playback menu is displayed, the station of
the frequency entered is played back.
Starting station seek tuning
Press the [ ] or [
onds once or several times to change the frequency
in increments..
Note:
For the reception area Europe: In the FM waveband,
only traffic information stations are tuned into if the
priority for traffic information is switched on.
Storing stations manually
Select the desired memory bank with the [ FM/AM ]
button.
Set the desired station.
Press one of the memory buttons for approx. 2 sec-
onds to store the current station at the button.
The station is stored.
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search for and
store the 6 FM stations offering the strongest reception
in the region in the current memory bank. Any previously
stored stations in this memory bank are deleted in the
process.
Select a memory band.
Press the [ ] button to display additional opera-
tiong options.
Press the [ ] button.
The tuner starts the automatic station seek tuning.
After the storing is completed, the radio plays the
station at memory location 1 of the previously se-
lected memory band.
Note:
For the Erurope reception area: If traffic information
is switched-on, only traffic informations are stored.
Adjusting the seek tuning sensitivity
The seek tuning sensitivity decides whether the auto-
matic station seek tuning finds only strong stations or
also weaker stations that may be noisy.
In the main menu, press the
tom bar.
The Settings menu is displayed.
In the left area of the Settings menu, press the [ Gen-
eral ] button.
Hold the blank area and drag up until "LOC" appears.
Tap the button right to "LOC" to turn it on/off.
If the button is highlighted, only stations with a
strong signal are found during seek tuning.
] button for approx. 2 sec-
button on the bot-
27