How The Cooker Hood Works - Fulgor Milano FDDH 900 TRC X Instructions Pour L'installation Et L'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

HOW THE COOKER
HOOD WORKS
GLASS VERSION MODELS
A:
Light ON/OFF key
The light switches on and off only when the
carriage is fully OPEN.
Pressing this button with the carriage closed
will cause the carriage to open and then the
light will switch on .
The button also serves to switch off the light
if it is on.
B:
ON/OFF key
This starts the extraction carriage upward
movement and when it is fully open, it sets the
second extraction speed.
With the carriage open: it switches off the mo-
tor and if on, the light; then it retracts the ex-
traction carriage.
C:
(-) Key
This reduces the speed of the extractor motor
from the 4th speed until the motor switch-
es off, without closing the pull-out car-
riage.
D:
Indicators
• This signals the speed setting, by only the
relevant LED switching on.
• This signals that all filters have been satu-
rated by all LEDs switching on.
E:
(+) Key
This increases the speed of the extractor mo-
tor, from 1st to 4th speed, without moving the
extractor panel.
20
EN
F:
Timer
10 min after setting, it serves to stop the ex-
tractor motor, close the carriage and switch
the lights off, if they are on. The set function is
signalled by the flashing LEDs "D" for the set
speed. The timer can be cancelled by press-
ing the key again.
TIMING
Other functions:
�s a result of t�e ne� ���� ��nerg� la�el� and
Automatic turn off:
���� � �codesign� regulations issued �� t�e
After 4 hours of continuous working from the
�uropean �ommission� ��ic� came into force
last setup, the appliance turns off and closes
as from �anuar� �st� ���� � our products �ave
automatically.
�een adapted to compl� �it� t�ese ne� re�ui-
rements.
Grease filters saturation:
�ll of t�e models compl�ing �it� t�e energ� la�el
After 30 hours of working, the speed indica-
re�uirements� are e�uipped �it� ne� electroni-
tors "D" will all flash simultaneously, signaling
cs including a timer device for suction speeds
the grease filters saturation.
control� ��en t�e air capacit� e�ceeds ���m
To reset this alarm, hold down the "TIMER"
�nternal motor models� �it� ma�imum air capa-
button for at least 3 seconds, while the car-
cit� �ig�er t�an ���m
riage is open.
mer device t�at automaticall� s�itc�es t�e suc-
tion speed from �t� to �rd speed� after � minutes
Calibration:
operation.
The cooker-hood carries out its self-calibra-
��ternal motor models are e�uipped �it� remo-
tion every 3 complete cycles of its extractable
te motors t�at � as for internal motor versions�
unit.
include a timer device t�at s�itc�es do�n t�e
By pushing the "TIMER" key 6 times consec-
suction speed ��en it e�ceeds ��� m
utively (MAX break between one push and the
��ternal �otors �nstructions �
other is 3 sec.) all the leds will flash and the
�emote motors� ��ose air capacit� e�ceeds
calibration will be reset.
���m
�� at �ot� �t� and �rd speed � �ill �ave
After the next 3 cycles the downdraft will carry
³
t�e follo�ing �� default timer control functions�
out its self-calibration.
��e suction speed is automaticall� s�itc�ed
from �t� to �nd speed� after � minutes operation.
Stand-by:
�f t�e appliance is �or�ing at �rd speed� it is au-
When the extractable unit is closed and the
tomaticall� s�itc�ed to �nd speed� after � mi-
light is switched off, the control panel, after
nutes operation. �peration speeds can also �e
6 seconds, activates the Stand-by function,
c�anged during operation.
reducing the brightness of the leds.
��e energ� consumption of t�e appliance in
This function can be stopped by pressing ON/
stand � �� mode is lo�er t�an �.��.
OFF or LIGHT key.
23
��� are e�uipped �it� a ti-
³
S-DD2-L FLUSH TOP
��.
³
��. ��ee
³

Publicité

Table des Matières
loading

Table des Matières