Using The Plastic Comfort Case Kit; Using The Kinetec Patient Pad Kit - Kinetec Prima Advance Manuel D'utilisation

Using the Plastic Comfort Case kit

Plastic Comfort Cases are specially designed to improve comfort and hygiene for the patient. They have
clips, fixed directly on the tubes of the machine's thigh and lower limb support segments, and straps with
protection stops to precisely and quickly adjust to the patient's leg dimensions.
Cleaning
To ensure optimal hygiene, clean the supports after each patient use.
Use a DISINFECTANT product (alcohol-free or <5% alcohol solution) in spray (plastic cases and metal
components).
Replacement parts
a 4670024048 Complete foot support
b 4635010561 Foot support strap kit
c 4635010157 Tibia case only
d 4670024329 Tibia case with straps
e 4635010165 Femur case only
f 4670024337 Femur case with straps
g 4650001876 Single strap
Part number to order a complete kit:
- fastening with clips: 4670024345
- fastening without clips: 4670023701 (if your
machine is not fitted with clips).

Using the Kinetec Patient Pad kit

The KINETEC Patient Pad Kit is designed for rapid fitting, optimal hygiene and maximum patient comfort.
®
- Please refer to the instructions below for using and positioning the straps.
FOR OPTIMAL HYGIENE, A NEW SET OF PADS SHOULD BE USED FOR EACH PATIENT.
CLEANING:
- Disinfecting the straps: Wash at 30°C, using a disinfectant solution during the rinse cycle. Example of
product that can be used: Solution "Bac linge" at 0.125 % or "Souplanios" at 0.125% from ANIOS
Laboratories. A complete list of distributors in your country is available on request.
The complete Patient Pad kit comprises:
- Set of 4 straps: 4650001107
- Foot support: 4650001131
Kinetec Prima Advance™
We recommend changing the cases every 500 hours of operation.
(See the Maintenance chapter for the running time counter).
a
b
g
EN
c
d
e
6/11
f