Electrical Connection; Procedure To Start The Machine; Using The Hand Control; Changing The Display Language - Kinetec Maestra Manuel D'utilisation

10. Electrical connection

2 versions of electrical protection are available for the device
Kinetec Maestra™ machine. The identification label shows which
version a machine is equipped with:
Type BF, Class II devices,
for home use, bear the following symbols:
Type B class I devices,
for use in a professional environment, bear the following symbol:
See page 21 for the meaning of the symbols.
Before connecting the device to the power supply, check that the
mains voltage matches that shown on the identification plate
(100-240 V~ 50/60Hz).
Connect the hand control (1)
Connect the power supply cable (2).
IMPORTANT
For Type B Class I devices, and to avoid all risks of electric shock, the machine should only be
connected to a power supply that has protective earthing.
To connect the power supply, only use the original cable supplied with the machine.
Check that the cables remain free around the device so that they do not get damaged.
Check that the machine is not damaged, in particular the protective housings.

11. Procedure to start the machine

Press the ON / OFF switch (3).
The display comes on, the machine carries out a self-test and the display shows in succession
Your device Kinetec Maestra™ is ready to be used.
Warning: Always check the motion parameters displayed on the hand control before starting the
device.

12. Using the hand control

12.1.

Changing the display language

Beginning
Switch the unit ON
Press simultaneously on the 2 keys
To change the language
To confirm the new language
Kinetec Maestra™
Keys to
Display
press
KINETEC
MAESTRA V01.0
KINETEC
PLEASE WAIT
KINETEC
40 STOP
Language:
ENGLISH
Language:
FRENCH
Or
SWITCH ON/OFF
EN
Check that the hand control is not
locked (See page 6).
50 110
The display indicates the language
selected.
The French language is selected.
Available languages: English, French,
German, Italian and Spanish.
Switch the machine off
OK
and then on again
to apply the changed
display language.
1
3
2
Remarks
5 / 23