Technical Specifications; Operating Conditions; Symbols Used; Warranty - Kinetec Prima Advance Manuel D'utilisation

Technical specifications

Product:
Lifespan of the machine:
Weight:
Splint dimensions:
Angular limits:
Speeds:
Patient sizes:
Maximum weight of the user:
Acoustic pressure:
Electricity:
Power supply:
Frequency:
Power consumption:
Class:
Protection class (device):
Protection class (carrying case):
Fuse:
Environment:
Storage/transport conditions:

Operating conditions:

Symbols used

Warning or CAUTION
(consult the accompanying
documentation)
STOP (power off)
ON (power on)
Right way up when box is stored
Contains electric and electronic
components; do not throw away with
household refuse.
Class II device
TYPE BF device
(protection against electric shocks)
IP20
See "Protection class" in section
IP01
"Technical specifications"

Warranty

The KINETEC warranty is strictly limited to the replacement, free of charge, or to factory repairs of part(s)
®
recognised as defective.
Kinetec SAS guarantees its continuous passive motion systems for 2 years against all defects of manufacture
from the date of purchase by the consumer.
Kinetec SAS is the only organization able to assess the application of the warranty to its systems.
The warranty will be considered null and void if the device has been used abnormally or under conditions of
use other than those indicated in the user's manual.
The warranty will also be considered null and void in the event of deterioration or an accident due to
negligence, inappropriate surveillance or inappropriate maintenance, or due to transformation of the
equipment or an attempt to repair the equipment.
Kinetec Prima Advance™
12 years
11 Kg (24 pounds)
95cm (37 inches) x 33cm (13 inches) x 33cm (13 inches)
-5° to 115°
from 40 to 145° per minute
Full leg: 71 to 99 cm (28 to 39 inches)
Tibia: 38 to 53 cm (15 to 21 inches)
Femur: 33 to 46 cm (13 to 18 inches)
135 kg (297 pounds)
<70dB
100-240V~
50-60 Hz
50 VA
Device of Type BF Class II or Type B Class I
IP 20 (protected against solid objects greater than 12.5mm,
but not protected against liquids)
IP 01 (non-protected against solid foreign objects,
protected against vertically falling water drops)
T 750mA 250V 6.3 x 32mm (KINETEC
Temperature:
Relative humidity: up to 93% without condensation.
Temperature:
Relative humidity: 15% to 93% without condensation.
Atmospheric pressure: 700 hPa to 1060 hPa.
PCB is powered (12Vdc)
Faults
Minimum SPEED
Maximum SPEED
Temperature Limit during storage or
transport
Fragile
TYPE B device
(protection against
electric shocks)
Humidity limit during storage or
transport
EN
order: 4610007434)
®
-25 to 70°C / -13 to 158°F.
5 to 40°C / 41 to 104°F.
FLEXION limit
EXTENSION limit
Follow the instructions for use
Follow the instructions for use
~
Alternating current
Keep dry during storage or transport
9/11