Panasonic EP-MAK1 Mode D'emploi page 43

Question
During operation
The angle of the backrest, legrest
or armrest automatically changes
at times.
The backrest is not restored to
upright position after massaging.
After use
Red marks are left on the under
side of my hands/arms after a
hand & arm massage.
How to adjust the <Position>
The correct shoulder position
cannot be found during scanning
of shoulder roller position.
(The shoulder position slips each
time.)
(continued)
The angle automatically changes in the following cases.
⁃
While scanning the shoulder roller position
The unit body moves automatically, and gets inclined to the
angle that makes scanning easy.
● The movement is not made when the unit body is inclined deeply.
Raises
around 60°
⁃
When is pressed to end the massage.
The chair automatically returns to the upright position.
● Only the legrest returns to the original position if the massage is
completed according to the timer.
● If is pressed to end the massage, all operations immediately
stop and the angle does not automatically change.
Only the legrest is retracted when the motion comes to stop by
timer operation.
Press twice to restore the backrest to the upright position.
Marks may remain on the hands and arms after use.
These eventually fade and are not a problem.
Correct scanning of shoulder roller position may not be possible
for some sitting positions (such as leaning forward).
Adjust with the shoulder position "▲" and "▼" button. (EN 22 to EN23)
For more correct scanning, sit firmly in the unit and lean back gently so
that your head is touching the pillow (backrest).
Answer
Reclines
around 20°
▶
Continued on the next page
EN43