Settings & adjusting method
⁃
This may not be accepted if selected when an operation is switching to another operation.
⁃
Details can be checked on the touch panel while the motion is repeated.
⁃
The number of repetitions is the same whether pressed once or pressed twice or more times.
ow
Medium
High
Press "OK".
Press "Close".
⁃
Refer to descriptions provided on EN44 for instructions when the highest intensity
Highest
setting is not strong enough or when the lowest intensity setting is too strong.
⁃
The adjustment may not be accepted if selected when an operation is switching
to another operation.
⁃
The intensity display section flashes while adjusting. Adjustments are not
accepted when flashing.
⁃
The selected stretch operation is made once.
After it is completed, the operation returns to the original course.
⁃
See EN29 for details of stretch actions.
Press
to perform adjustments when adjusting positions of rollers for an ongoing motion.
⁃
Adjustments can be made up to three times in each direction.
⁃
Adjustment may not be possible depending on the place where the massaging is being
made.
▶
Continued on the next page
EN33