Panasonic EP-MAK1 Mode D'emploi page 27

Would like to massage with operations to your liking
⁃
It is possible to switch OFF or ON the massaging operation for each body part, and to carry out only the desired
massaging operation. (Edit program)
⁃
The operation is made after starting to massage.
⁃
If user registration has been made, the contents selected in program editing will be stored in memory.
Screen displays and actions are described, using the
example of the "Neck shiatsu" course.
Body part selections: Neck and back.
①
Press "Edit program"
⁃
The program editing screen for the currently selected body part
is displayed.
⁃
The operations within the frame (yellow) is performed while the
program is being edited.
(Example: Neck squeeze-knead)
③
Press
⁃
The selected action expires and
the next action is performed.
⁃
If the massaging operations on the same location continue for 5
minutes, the massage rollers move upward by about 3 cm (1.2 in.).
(Massage rollers may move downward, depending on their position)
<When editing operations of other body parts>
, then select the operation for editing, then perform Steps ③ and ④ described above.
Press
⁃
Each time is pressed, the program editing screen for the selected body part is displayed.
Method of editing a program
④
Press "Close"
Press
②
Select the operation for editing.
⁃
The edited operation is started.
ON OFF
Switches each time it is pressed.
EN27