SilverCrest SSVS 1000 B2 Mode D'emploi Et Consignes De Sécurité page 9

CAUTION – PROPERTY DAMAGE!
Do not add any foods to the water bath unless they are
►
firmly sealed . Any water getting into the food will produce
unfavourable results or spoil the food .
Ensure that the appliance, the mains cable and the plug do
►
not come into contact with heat sources such as hotplates or
naked flames .
Never place the appliance near sources of heat .
►
Never open the housing . If you do, it can no longer be as-
►
sured that the appliance is safe, and the warranty will be
invalidated .
Allow the appliance to cool down completely before clean-
►
ing and stowing it away it .
In the case a malfunction occurs on the appliance, an error
►
code will blink on the display . When the error codes "Er1",
"Er2", "Er3" or "Er6" are displayed, switch off the appliance
immediately, pull the mains plug out of the socket and con-
tact the Service Hotline (see Section Service) .
The error code display "Er4" informs you that the appliance
is not in the water . Handle the appliance as described in
the Section Preparing the appliance . The error code
display will then go out .
■ 6
│ GB│IE
SSVS 1000 B2