Güde GKS 108 Traduction De La Notice Originale page 14

Electrical Residual Hazards
Hazard
Direct electrical contact
Noise Hazard
Hazard
Hearing impairment
Material and Other Substances Hazards
Hazard
Contact, breathing in
Fire or explosion
Human Factors Neglect
Hazard
Insufficient local lighting
Other Hazards
Hazard
Breakage in operation
Rejected objects or fluids
Disposal
Disposal instructions are illustrated in the form of pictograms on the device or packaging. Description of the pictograms is given in
"Identification" chapter.
Disposal of transport packaging
Packaging protects the device against damage during transport. Packaging materials are usually selected according to their effect on
environment and disposal methods and can therefore be recycled.
Returning of the packaging back to circulation saves resources and costs for packaging disposal.
Parts of the packaging (e.g. foil, styropor) may be dangerous for children. Risk of suffocation!
Keep these parts of the packaging out of reach of children and dispose as soon as possible.
Operator Requirements
The operator shall read the instruction manual carefully before using the unit.
Qualification
No special qualification is required for use of the unit except for detailed direction by a professional.
Minimum Age
Only persons above 18 years of age are allowed to work with the unit.
Exempted from the provision is the use of the juvenile trainees if they work in the course of their professional training with an aim to
obtain the skill under a trainer supervision.
Description
Defective cables or plugs may
cause electrical shock.
Description
Prolonged work with unit may
result in hearing impairment.
Description
Dust nuisance may cause
impairment of lungs .
Metal grinding produces
sparkles and the easily ignitable
substance/petrol) may ignite.
Description
Insufficient lighting produces a
high safety hazard.
Description
Defective grinding discs may
break in operation and cause a
severe injury to the operator
Fragments of the disc may
cause an injury of your eyes
Protective action
Always have the defective
cables or plugs replaced by a
professional. Do not use the
unit unless with stray current
protection (FI)
Protective action
Wear ear protectors.
Protective action
Filter respirator is
recommended
Do not use the unit close to
easily inflammable substances
Protective action
Provide for sufficient lighting
when working with the unit.
Protective action
Check the grinding disc for
defects on a regular basis.
Avoid any use of a defective
disc. Always wear protective
clothing in conformity with the
job.
Always wear protective goggles
when working on the unit.
14
Residual Hazard
Residual Hazard
Residual hazard
Residual hazard
Residual hazard