Other Operations And Settings; Activate Backlight; Beep Tone On / Off; Replace Battery - Oregon Scientific Touch ECG Strapless Mode D'emploi

watch only allows for all data to be deleted.
To delete memory:
1. Touch MODE/- repeatedly to select "MEM".
2. Touch +/ST/SP repeatedly until "DELETE" will be
displayed.
3. Touch MODE/- to confirm.
DONE indicates the record has been cleared.
MODE/-
MODE/-
When starting an exercise and memory is full, "FULL" will be
displayed, followed by "DELETE".
• Touch MODE/- to delete all records
OR
• Touch ENTER to ignore and start an exercise
without recording data for it.

OTHER OPERATiONS AND SETTiNGS

ACTiVATE BACKLiGHT

Touch EL. (Touch EL again to extend backlight for another
5 seconds).
NOTE
The backlight function will not operate if " " is
+/ST/SP
displayed.

BEEP TONE ON / OFF

When time is displayed, touch +/ST/SP to activate /
deactivate beep tone.
indicates beep tone is deactivated.

REPLACE BATTERY

If the battery power of your watch is low, the watch will
display: .
To replace watch battery:
1. Use a coin to open the battery compartment lid by
turning it anticlockwise.
2. Remove the old battery and insert a new CR2025, 3V
lithium battery.
3. Secure the lid by turning the coin clockwise.
iMPORTANT
Remember to set the profiles after every
battery replacement or reset.
9