General notes
•
The unit is for personal use only and is not intended for medical or commercial
applications.
•
Please note that technically related measuring tolerances are possible, as the
scale is not calibrated for professional medical applications.
•
Before submitting any complaint, fi rst check the batteries and replace them if
necessary.
•
Should you have any questions concerning the use of our devices, please contact
your dealer or customer service.
4
Unit description
Overview
1
Electrodes
▲
2
Up button
3
SET button
4
MEM button
▼
5
Down button
5
Initial use
Inserting the batteries
Please remove the plastic insulating strip and/or position the batteries correctly with regards to
polarity. If the scale fails to operate, remove the batteries completely and reinsert them.
Changing the weight unit
The scale shows the values in kg. You can set the device to measure in kilograms, or in pounds
"LB" and stones "ST", using the button at the back of the device.
Setting up the scale
Set up the scale on a level and solid surface.
1
2
3
4
5
1
13