Calibrate; Transfer Sd Card - Spektrum DX18 Manuel D'utilisation

Calibrate

The Calibration screen stores the potentiometer endpoints for all
proportional controls. It is mandatory to complete the calibration
after changing the stick mode selection.
Calibrating the Transmitter
1. Carefully move the gimbal sticks in a + shape moving from
left to right, then up and down. Press gently on the gimbals
at the stops to achieve an accurate calibration. Return both
gimbal sticks to the center position.
2. Move the Left and Right Side Levers to the top and bottom
positions, then move the side levers to the center position.
IMPORTANT: Only move one side lever at a time during
calibration.

Transfer SD Card

Import Model
To import an individual model fi le from the SD Card:
1. Save the model fi le to the SD Card.
2. Select the Model List location where you wish to import the
new model fi le.
3. In the SD Card menu, scroll to Select Option and press the
scroll button once.
4. Scroll to Import Model and press the scroll button again to
save the selection. The Select File screen appears.
5. Select the model fi le you wish to import. The Overwrite
screen appears.
IMPORTANT: When you select Import, the transmitter
leaves the System Setup List.
6. Select Import to confi rm overwriting the current model fi le.
The transmitter activates the new model fi le and the Main
Screen appears.
NOTICE: A Prefl ight Checklist may appear prior to the Main
Screen if the checklist was active during the model fi le export.
Select MAIN to exit the Prefl ight Checklist.
See "Prefl ight Setup" for more information.
Import All Models
To import all models from the SD Card, select Import All Models,
and then confi rm by selecting IMPORT.
NOTICE: This function overwrites the model memories. Ensure
that the models currently in your transmitter are saved on an
SD card separate from the transmitter before performing this
function.
You can import a model to any location you want. If you prefer to
use Import All, you can use your PC to rename the SPM fi le. The
fi rst two digits (01 to 50) are the destination model number. Your
SD card can only contain 50 models. Save fi les to folders on the
card then remove from the card all unused models. Files are
selected by their position in the directory table.
SPEKTRUM DX18 • TRANSMITTER INSTRUCTION MANUAL
3. Move the Knob to the full clockwise and counter-clockwise
positions, then return the Knob to the center position.
4. Select SAVE to store the calibration.
Export Model
You can use the Export Model option to export a single model
fi le to the SD Card.
1. Make sure the active model fi le is the one you wish to
Export.
2. Scroll to Select Option and press the scroll button once.
3. Scroll to Export Model and press the scroll button again to
save the selection. The Export to SD screen appears. The
fi rst two characters of the fi le name correspond to the Model
List number (01, for example).
4. (Optional) If you wish to rename the model fi le before export-
ing it to the SD Card:
a. Scroll to "Save to:" and press the scroll wheel. The File
Name screen appears.
b. Assign a new fi le name. The fi le name can contain up to
25 characters including the .SPM fi le extension.
c. When you are done assigning the new fi le name, press
the Back button to return to the Export to SD screen.
5. Select Export to save the fi le to the SD Card. When the
export is complete, the transmitter returns to the SD Card
Menu screen.
Export All Models
To export all models to the SD Card:
1. Select Export All Models in the SD Card Menu options. The
Export All Models screen appears.
IMPORTANT: Export All Models will overwrite any model
fi les that are:
a. Already saved on the SD Card and
b. You are exporting a model fi le with the same
name. Always save model fi les to a different SD
Card if you are not sure.
2. Select Export to overwrite fi les on the SD Card or Cancel to
return to the SD Card Menu.
Update AirWare
IMPORTANT: The orange LED Spektrum bars fl ash and a status
bar appears on the screen when AirWare updates are installing.
Never power off the transmitter when AirWare updates are
installing. Doing so may damage the system fi les.
Before installing any AirWare fi les, always Export All Models to
an SD Card separate from the SD Card containing the AirWare
update. The AirWare update may erase all model fi les.
For more information on AirWare updates, visit
Community.SpektrumRC.com
EN
21