Common System Setup Functions System Setup; Model Select; Model Type; Model Name - Spektrum DX18 Manuel D'utilisation

COMMON SYSTEM SETUP FUNCTIONS
SYSTEM SETUP

Model Select

Model Select enables you to access any of the 50 internal model
memory locations in the Model Select list.
1. Scroll to the desired model memory in the Model Select list.
2. When the desired model memory is highlighted, press
the scroll wheel once to select the model. The transmitter
returns to the System Setup List.

Model Type

Select from Airplane, Helicopter or Sailplane model types.
IMPORTANT: When you select a new model type, you will delete
any programming data in the current model memory. Always
confi rm the desired model memory before changing model
types.
It will be necessary to re-bind after resetting the model type.
To change the model type:
1. Scroll to the desired model type and press the scroll wheel.
The Confi rm Model Type screen appears.

Model Name

Model Name enables you to assign a custom name to the
current model memory. Model names can include up to 20
characters including spaces.
To add letters to a Model Name:
1. Scroll to the desired letter position and press the scroll
wheel once. A fl ashing box appears.
2. Scroll left or right until the desired character appears. Press
the scroll wheel once to save the character.
SPEKTRUM DX18 • TRANSMITTER INSTRUCTION MANUAL
Direct Model Access
Press the Clear and Back buttons from the Main Screen or a
telemetry screen to access Model Select.
2. Select Yes and press the scroll wheel to confi rm the model
type. All data will be reset. Selecting No will exit the Confi rm
Model Type screen and return to the Model Type screen.
3. Scroll to the next desired letter position. Repeat Step 1 and 2
until the Model Name is complete.
4. Select BACK to return to the System Setup list.
EN
13