Connecting The Camera To Your Computer Via The Cyber-Shot Station; Canceling The Usb Connection; Care And Maintenance - Sony CSS-SA Mode D'emploi

Connecting the camera
to your computer via
the Cyber-shot Station
1
Connect the Cyber-shot Station to your
computer by the USB cable supplied
with the Cyber-shot Station.
4
2
Turn on the camera.
The USB connection between the camera
and your computer will be established.
Then you can transfer images to your
computer. For further details, refer to the
operating instructions supplied with the
camera.
When the Cyber-shot Station is
communicating with your computer using
the USB cable, do not remove the camera
from the Cyber-shot Station. Removing the
camera may damage the images.
Canceling the USB
connection
1
Disconnect the USB cable.
2
Turn off the computer.
12-GB

Care and maintenance

Clean the Cyber-shot Station with a soft cloth
slightly moistened with water, and wipe the
surface with a dry cloth. Do not use any type
of solvent such as thinner, alcohol or benzine
as this may damage the surface.