Basic Operation; Unlocking The Remote Control; Turning Stimulation On/Off; Selecting Your Language/Screen Preference - Boston Scientific Vercise DBS Remote Control 2 Mode D'emploi

Vercise ™ DBS Remote Control 2 Directions for Use
The remote control has a communication range of 22 inches (55.9 cm). When using the remote control,
avoid common sources of interference, such as televisions and computer monitors. For additional
telemetry information, see the "Telemetry Help" section.

Basic Operation

Unlocking the Remote control

The remote control goes into idle (or sleep) mode when not in use. It can be reactivated by pressing the
Lock/Unlock button on the right side of the remote control.

Turning Stimulation On/Off

After unlocking the remote control, press the Stimulation ON/OFF button to turn the Stimulator on
or off.

Selecting Your Language/Screen Preference

The remote control allows you to choose either an iconic screen or a text screen in one of the
languages provided. Refer to "Languages" for additional instructions.
Note: Throughout this manual, the English text and iconic screens are shown.

The Home Screen

After unlocking the remote control, the Home screen will appear if the remote control was previously
linked to a Stimulator. The Home screen shows the number of the active program, stimulation status
(ON/OFF), and Navigation to the Main Menu. It also shows the battery level of the remote control
(see "Remote Control Battery" section). The Home Screen can be accessed from any other screen by
pressing the Home button.
Vercise™ DBS Remote Control 2 Directions for Use
90985317-02 REV A 2 of 557