Troubleshooting; Telemetry Help - Boston Scientific Vercise DBS Remote Control 2 Mode D'emploi

Vercise ™ DBS Remote Control 2 Directions for Use

Troubleshooting

Telemetry Help

Common sources of interference, such as televisions and computer monitors, can affect wireless
communication. You will continue to have access to the remote control menus even if the remote
control is outside its effective communication range. If you enter a command to change your settings or
programs while the remote control is outside of its effective communication range, you will have several
seconds to move the remote control within range of the Stimulator to send the command. After the
command is received by the Stimulator, the remote control will make a double-beep then display the
requested change on the screen. If the remote control is unable to communicate with the Stimulator,
the Telemetry Error message will appear:
To retry communication with the Stimulator – this resends the last command – select Retry .
To cancel communication and return to the screen, press .
The Telemetry Help tool is also available to assist you in improving communication between the remote
?
control and the Stimulator. To use the Telemetry Help tool, select Telemetry Help . The following
screen will be displayed:
The telemetry bars indicate the strength of wireless communication. The number of bars will change
depending on the distance and orientation of the remote control from the Stimulator. This tool will
continue to measure the strength of communication for 30 seconds or until is pressed.
Vercise™ DBS Remote Control 2 Directions for Use
90985317-02 REV A 18 of 557