Program Selection And Activation - Boston Scientific Vercise DBS Remote Control 2 Mode D'emploi

Accessing Additional Options from the Main Menu

Program Selection and Activation

A stimulation program is a set of stimulation parameters that determine the patient's therapy. A program
may apply stimulation to as many as four independent stimulation fields or areas, depending on how
the program is set up. For example, one area may correspond to a right brain target, while another area
may correspond to a left brain target. The remote control can store up to four programs – numbered 1
through 4 – for the patient to select and activate at any time.
button on the left side of the remote control to display the Programs screen.
1. Press the
Note: You can also navigate to the Programs menu from the Main Menu. Refer to Accessing the
Main Menu for additional instructions.
Change Program.
2. Select
Arrow buttons to navigate to the desired Program.
3. Press the Up or Down
button to Select the Program.
4. Press the Right Arrow
Vercise™ DBS Remote Control 2 Directions for Use
90985317-02 REV A 5 of 557