Alpine PXA-H600 Mode D'emploi page 26

26
Basic Operation
• The output for the subwoofer is
monaural signal.
• When the automatic adjustments
have been carried out, the settings
are:
Parametric/EQ: Flat (level 0)
Subwoofer Fc: 200Hz
Time Correction: Measured value
• If the subwoofer is installed in the
vehicle's trunk, the compensation
function of the unit cannot be
performed properly. In order to have
the compensation function work
effectively, try the followings.
– If your vehicle is a sedan with
the trunk-through construction,
pull down the rear seat. Install
a 6-1/2" or larger size speaker
onto the rear deck to use it as
a subwoofer, or install the
subwoofer enclosure inside the
vehicle room.
– If an acrylic resin board is
attached to the front of the
speaker enclosure, remove the
acrylic resin board.
English