Alpine PXA-H600 Mode D'emploi page 28

1
2
28
TCR
TCR
Basic Operation
Adjusting Gain Characteris-
tic/Time Correction/Phase
Characteristic (Automatic
Adjustments)
Press and hold the TCR button for more than 2
seconds to activate the Auto Adjustment mode.
1. "NOW ADJ." appears in the display.
2. The unit automatically performs adjustments
of the Gain Characteristic.
3. The unit automatically performs adjustments
of the Time Correction.
4. The unit automatically performs adjustments
of the Phase Characteristic.
5. "COMPLETE" appears in the display and the
automatic adjustment mode ends.
To end the Auto Adjustment mode, press the
TCR button.
Notes: • In the Subwoofer OFF and Defeat
ON modes, the Auto Adjustment
cannot be performed.
• If the supplied microphone is not
connected, the Auto Adjustment
cannot be performed.
• If the Auto Adjustment procedure is
canceled in the middle of its opera-
tion, the original settings cannot be
restored. For this reason, be sure to
store your settings in memory before
starting the Auto Adjustment
procedure.
English