Adjustments - Sony LMD-1041 Mode D'emploi

Adjustments

You can make adjustments using the buttons on either the
monitor or the remote commander.
Adjusting the picture
You can make adjustments for each signal separately.
1 Press the signal input button of the signal you want
to adjust.
LINE A LINE B LINE C
2 Select the parameter by pressing the adjustment
parameter buttons.
The selected parameter and its present setting in the bar
display appear.
Example: for the color adjustment
COL
3 Press the + or – button to adjust while watching the
picture.
When you finished the adjusting
The bar display automatically disappears after about 5
seconds.
Resetting the adjustment to the factory
setting
Press the RESET button using an object of 2.5 mm (1/8
inch) diameter.
All the parameters, except the backlight brightness, are reset
to the factory setting.
RESET
10
Adjusting the sound
Press the VOLUME + or – button.
VOLUME
Muting the sound
Press the MUTING button on the remote commander.
MUTING
Press again to cancel muting.