Hydrotechnik MultiSystem 5060 Mode D'emploi page 36

MultiSystem 5060
Mode d'emploi
Define default name
When copying files to the USB stick, only the 8.3 name convention is sup-
ported. Therefor all files will be renamed. Here you may define a header for the
new file names. Since the name may only have eight characters, you should
leave enough space for a consecutive numbering of the files.
1. Highlight „default name":
2. Start definition:
3. Enter desired header; you may use all alphanumeric characters.
4. Confirm header:
Display information on the USB stick
Waiting time up to four minutes
If information shall be displayed on the USB stick, the memory capacity of the
stick is tested. This may last up to four minutes, dependant on the capacity of
the stick.
You may display information on the detected USB stick by pressing
the USB stick menu is displayed. Then the memory capacity of the stick is
tested, what may last up to four minutes. Then the screen shown here will be
displayed (example).
Here you can see the size of the total and of the available memory, and a list of
files contained on the stick that are interesting for the MultiSystem 5060. Press
to leave the submenu.
© Hydrotechnik GmbH • Tous droits réservés
Rev. 1.6/100927FR
.
while
Page 36 à 47