Sefa iSPRAY PRO Manuel De L'utilisateur page 11

After a couple of seconds, the initial liquid charge will finish.
The machine is now filled with liquid and ready for operation.
If there is no liquid flowing, then check that all the tubes are inside the tanks and that
the caps are in place and properly sealed.
If you get any error messages, for further information, check the topic: Troubleshooting>
General Problems in the Operational Manual.
d� Nozzle Check
You should perform a nozzle check to see if all four nozzles are firing correctly.
To perform the nozzle check, start from the Home screen.
Press the Nozzle button.
You can, also, open the Nozzle Access Cover to have a better view.
Enable all the nozzles, one-by-one, (or only the nozzles you want to check).
Press the Spray button. Each nozzle should be firing in an 80O angle.
Exit the Nozzle Check screen, by pressing the back arrow, to return to the Home screen.
If the nozzles are not firing correctly, for further information, check the topic:
Troubleshooting> Spraying problems.
www.sefa.fr
User guide - SEFA iSPRAY PRO
11