Sefa iSPRAY PRO Manuel De L'utilisateur page 8

2021-03-25
c� Liquid installation
Open the Tank Access Cover to gain access to the Tank Storage Compartment.
There are 4 empty tanks in the slots L1, L2, CL, and MT. You can fill the empty tanks or
directly use a new pretreatment tank in its place.
Tanks that you need to refill/replace in blue below.
L1 L2
L1 L2
L1 L2
L1 L2
Shake the new tanks/bottles with the pretreatment well, before using them inside the
machine.
Fill/Replace Tank L1 or/and L2 with the pretreatment liquid you are going to use.
In case of using 2 pretreatment liquids, fill/replace both Tanks L1 and L2 with the accor-
ding pretreatment liquid.
Fill the Tank CL with distilled water.
8
Option 1:
CL MT
Using 1 Pretreatment Liquid (L1 or L2) and
Distilled water in the (CL) Tank.
CL MT
Option 2:
Using 2 of the same type Pretreatment Li-
quids (L1 +L2) to double your capacity and
Distilled water in the (CL) Tank.
CL MT
Option 3:
Using 2 different Pretreatment Liquids (L1 /
L2) and Distilled water in the (CL) Tank.
CL MT
www.sefa.fr