Safety - Sefa iSPRAY PRO Manuel De L'utilisateur

2021-03-25
Please read the Operating Manual carefully before operating the machine.
The machine should be operated by a qualified person who is aware of the potential
dangers arising from improper use of the equipment. The factory-installed pneuma-
tic, electrical and mechanical settings programmed by our technicians and the safety
features must not be altered under any circumstances. SEFA accepts no liability for
problems that may be caused by the machine if such alterations are made.
THIS MACHINE IS DESIGNED FOR USE BY A SINGLE QUALIFIED OPERATOR
a� International symbols
b� Important safety precautions
Personal Protective Equipment (PPE) must be worn (e.g. gloves and
safety glasses).
Do not touch hot parts of the machine during use. Do not place hands
inside when the machine is switched on. Make sure the operator is
not exposed to risks of electrocution or other hazards when handling
the machine.
Check the machine each day before use. Make sure there is nobody in
the vicinity of the machine before starting work. If the machine mal-
functions, cut the power supply and look for the cause of the problem
(see the Servicing section of this manual).
c� Safety features
No changes must be made to the safety covers and safety systems.
They must be refitted if they are removed for servicing work.
They must be kept in place and in good condition during normal use.
Technical parts documents are supplied with the machine. Please read them before
starting to use your SEFA machine.
6

SAFETY

OFF
ON
DANGER, WARNING
ELECTROCUTION
HAZARD
www.sefa.fr