Sefa iSPRAY PRO Manuel De L'utilisateur page 13

c� Linear Edit
Select the direction you want the garment to have, on the drawer plate. You can rotate
it 180°, by pressing the icon.
Select the nozzles you want to enable. You are able to choose from 1 up to all 4 nozzles.
The nozzles spray, exactly as shown on the screen, in the Nozzle Carriage Chamber.
e.g. If you select the second nozzle from the left on the screen, the same nozzle will
spray in the Nozzle Carriage Chamber.
Select the Spray Length by changing the value with the +/ - buttons.
Select the distance from the top, by changing the Neck Offset value with the +/ -
buttons.
Select the liquid spraying amount per ml, for the max spray area (41x60cm / 16x23.6in),
from the slide bar. Tap on the Calculate button, to check the actual liquid amount
sprayed on the selected area. When finished, tap on the Confirm button.
d� Save custom presets
On the Home screen, you can save your job preference, by holding for 3 seconds on any
of the ten custom job preset buttons.
www.sefa.fr
User guide - SEFA iSPRAY PRO
13