Tank Procedure - Sefa iSPRAY PRO Manuel De L'utilisateur

2021-03-25
a� Filling / Replacment
CHECK «LIQUID INSTALLATION» IN THE INSTALLATION MENU.
On the Home screen tap on the Menu button and select Tanks. Tap the Re-Circulate
button (of the tank you refilled previously) for three seconds to initiate the liquid re-cir-
culation process that will remove any air bubbles from the tank tubes.
b� Tank selection
On the Home screen tap on the Menu button. Select Tanks.
In this Tank Selection screen, you can check, which tank you have, currently, selected.
If you wish to select a different tank to spray, tap on that tank you want, and press
Confirm. iSpray Pro will automatically switch to your preferred tank.
You can, also, tap on the CL Tank, to manually perform the shutdown maintenance.
Choosing CL will clean, only the basic line to the nozzles, and will not bring the machine
into a shipping state. For further instructions, check the topic: Transporting iSPRAY Pro.
16

TANK PROCEDURE

www.sefa.fr