Installation
Once your handset is fully charged and ready for use,
you can install the base unit on a desktop or mount it to
a wall. This section provides the step-by-step
instructions you will need to install the phone.
Installing the Phone on a Desk
1 Plug the telephone line cords for Line 1 and Line 2
into the jack on the back of the phone. (Line 1 =
Tel Line 1/ L1 + L2 . Line 2 = Tel Line 2 ) Plug the
corresponding telephone line cords into the wall
jacks designated for Line 1 and Line 2.
Note:
Use the Tel Line 1/ L1 + L2 if your wall jack has only one
socket for both lines.
8